Showing 1-17 of 847 results

Bipolar Stepper Motor Driver Circuit H Bridge Shopping Deals on 20.11.2019 at TOPPIDUS

  • Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

    Specification: Chip: L298N Logic voltage: 5V Logic current 0mA-36mA Storage Temperature: -20 ℃ to ℃ to +135 Operating mode: H-bridge driver (dual) Drive voltage: 5V-35V Drive current: 2A (MAX single bridge) Maximum power: 25W Dimensions: 43x43x27mm Package include: 1x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available. When ENA enable IN1 IN2 ...

    • ASIN: B014KMHSW6
    • Brand: Qunqi
    • UPC: 783325944715

  • WGCD 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for Arduino

    Specification: Name: Dual H bridge motor driver module Working mode: H bridge driver (dual) Main control chip: L298N Logic voltage: 5 v The driving voltage: 5 v - 35 v Logic current : 0mA-36mA Drive current: 2 a (MAX single bridge) Storage temperature: - 20 °C to + 135 °C Max power: 25 w Weight: 30 g Size: 43 * 43 * 27 mm L298N motor controller board module, ideal for Arduino smart car power UNO MEGA R3 Mega2560 Package included: 5 pcs L298N Motor Controller Board Module...

    • ASIN: B06X9D1PR9
    • Brand: WGCD
    • UPC: 602914545525

  • TIMESETL 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Electric Projects

    L298N of TIMESETL TIMESETL Motor Drive Controller - High Quality Specification: Size: 43*43*27mm/ 1.69*1.69*1.06 inch Dual H bridge drive (can drive 2 DC motors) Chip: L298N Logical voltage: 5V Drive voltage: 5V-35V Logic current: 0mA-36mA Drive current: 2A(For each DC motor) Weight: 30g TIMESETL L298N DC Stepper Motor Drive - Usage Great for Arduino, Smart Car, Power UNO, MEGA R3, Mega 2560, etc If driving voltage is more than 12V, please use external 5volt logic outputs to switch the H-bridge circuits. Delivery 5 x L298N Stepper Motor Contro...

    • ASIN: B078D7DR9V
    • Color: L298N Driver
    • Brand: TIMESETL
    • UPC: 611702529715

  • DC Motor Driver, DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation

    Parameters: 1. Power supply voltage 6.5V-27V, the power cannot be reversed or over 27V, or may burn the module, it is recommended connecting in series 15A fuse in the power input. 2. Dual motor interface, each rated output current 7A, peak current 50A, the motor interface cannot short-circuit, it is recommended connecting in series 15A fuse. 3. The enable signal and forward and reverse control signal control voltage 3-6.5V. 4. Enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ, PWM minimum pulse width 10us. 5...

    • ASIN: B06XGD5SCB
    • Brand: DROK
    • UPC: 701822755689

  • DAOKI 5 PCS L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

    L298N is a kind of high voltage,high current motor driver chip produced by ST company.Having 15 pins as package, this chip has such features as high working voltage(maximum voltage up to 46V),large output current(instantaneous peak current up to 3A,continuous working current 2A) and 25W of rated power.Two built-in H birdge high voltage and large current full bridge drivers can be used to drive the DC motor and stepper motor,relay coil and so on.Using standard logic level signal control,it has two enable control ends.It permits or prohibites dev...

    • ASIN: B00XAGRQTO
    • Color: L298N
    • Brand: DAOKI
    • UPC: 695259095961

  • TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Two Phase Hybrid Stepper Motor for CNC

    Product Advantages: The TB1H is a high performance microstepping driver based on the latest original for high-efficiency TB6600HG for IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency. Feature: PWM chopper type bipolar stepper motor driver IC. 1. 9V-42V DC power supply. 2. H bridge bipolar constant phase flow drive. 3. the maximum 4.0A of the eight kinds of output current. 4. the largest 32 subdivision of the 6 models are optional. 5. input signal high speed photoelectric isolatio...

    • ASIN: B07B9ZQF5D
    • Brand: NUXIUS
    • UPC: 713839364419

  • 5PCS Stepper Motor Driver, WAM Direct TB6600 4A 9-42V Stepper Motor Driver CNC Controller 32 Segments 2/4 Phase Hybrid Stepper Motor Driver Board

    Feature: PWM chopper type bipolar stepper motor driver IC. 1. DC 9V-42V power supply. 2. H bridge bipolar constant phase flow drive. 3. the maximum 4.0A of the eight kinds of output current. 4. the largest 32 subdivision of the 6 models are optional. 5. input signal high speed photoelectric isolation. 6. common-anodestandard single pulse interface. 7. offline to maintain the function. 8. semi closed enclosure can be adapted to a more stringent environment. 9. to provide energy-saving semi-automatic current lock function. 10. built-in temperatur...

    • ASIN: B07DPMMFT6
    • Brand: mcwdoit
    • UPC: 687345904677

  • Longs Motor 2-Phase Stepper motor driver DM542A 1.0-4.2A 18-50VDC for CNC Router 

    Features:High performance, low priceAverage current control, 2-phase sinusoidal output current driveSupply voltage from 18VDC to 50VDCOpto-isolated signal I/OOvervoltage, under voltage, overcorrect, phase short circuit protection15 channels subdivision and automatic idle-current reduction8 channels output phase current settingOffline command input terminalMotor torque is related with speed, but not related with step/revolutionHigh start speedHigh hording torque under high speed...

    • ASIN: B07G95WB4H
    • Brand: Longs Motor

  • Stepper Motor Driver, DC 24~50V 2.2~8.3A/Phase 3 Phase Stepper Motor Driver 200Kpps Nema 23/34 Controller

    Specification: Model: FYTM506T Voltage: DC 24~50 V Drive current: 2.2~8.3A/phase (8 level adjustable) Subdivision: The highest resolution is 25600 steps/rev (16 level adjustable) Maximum pulse frequency: 200 Kpps Suitable: Outer diameter 56 ~ 86mm series stepper motor Package list: 1 * Motor driver Note: 1. Do not reverse the power supply. Do not exceed the input voltage of DC50V. The green indicator light PWR lights when the drive is powered. 2. The input control signal voltage is 5V. When it is higher than 5V, the current limiting resistor ...

    • ASIN: B081NNN5DK
    • Brand: Pbzydu
    • UPC: 738584979497

  • MYSWEETY TB6600 4A 9-42V Stepper Motor Driver CNC Controller, Stepper Motor Driver Nema tb6600 Single Axes Hybrid Stepper Motor for CNC

    Download the English manual : https://s3.us-east-2.amazonaws.com/stepper-motor-driver/TB6600/MYSWEETY+TB6600+Stepper+Motor.pdf Feature: PWM chopper type bipolar stepper motor driver IC 1. 9V-42V DC power supply 2. H bridge bipolar constant phase flow drive 3. the maximum 4.0A of the eight kinds of output current 4. the largest 32 subdivision of the 6 models are optional 5. input signal high speed photoelectric isolation 6. common-anodestandard single pulse interface 7. offline to maintain the function 8. semi closed enclosure can be adapted to...

    • ASIN: B01MYMK1G9
    • Brand: MYSWEETY
    • UPC: 713839367052

  • HiLetgo A3967 Stepper Motor Drive Board EasyDriver Stepper Motor Driver for Arduino Raspberry Pi Robot

    Instruction: A3967slb is pwm constant current control micro-step drive two-phase stepper motor dedicated drive. Its operating voltage up to 30v, the drive current up to 750ma, a3967slb can drive a two-phase stepper motor, enabling subdivision drive. Chip internal pwm current control circuit can be set by the pfd voltage is set to slow, fast, mixed three current decay mode, if the pfd side of the voltage is higher than 0.6vdd, then choose slow decay mode. If less than 0.21vdd, then select the fast decay mode. Between the two is the hybrid decay ...

    • ASIN: B00WSNZEBM
    • Brand: HiLetgo
    • UPC: 702949574979

  • Stepper Servo Robot Shield v2 with PWM Driver Shield For Arduino

    100% Brand new and high quality! 2 connections for 5V servos connected to the high-resolution dedicated timer - no jitter! 4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution) Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping. Motors automatically disabled on power-up. Big ter...

    • ASIN: B07FLWR675
    • Brand: TOFKE
    • UPC: 699747765718

  • Stepper Motor Driver, DC 24-80V Stepper Motor Driver Nema 34 Stepper Motor Driver Controller

    Feature: H-bridge bipolar constant-phase flow subdivision drive control circuit, high reliability The drive current is continuously adjustable from 0.9A to 3.0A, and the usability is strong. When the pulse stops for more than 100ms, the coil current is automatically halved, and the highest pulse frequency can reach 200Kpps. The drive has multiple protection functions such as: overcurrent, overvoltage, undervoltage, short circuit protection. The motor driver is suitable for the outer diameter of 56 ~ 86mm series stepper motor. Suitable for a var...

    • ASIN: B07ZKNPM8R
    • Brand: Yanmis
    • UPC: 737983710960

  • Stepper Motor Driver, DC 24-80V 0.9-3.0A/Phase 34 Stepper Motor Driver Adjustable Stepping Motor Controller for CNC

    Specification: Model: FYQM803A Voltage: DC 24~80 V Drive current: 0.9~3.0A/phase (8-speed adjustable) Subdivision: The highest resolution is 12800 steps/rev (6-speed adjustable) Maximum pulse frequency: 200 Kpps Suitable: Outer diameter 56 ~ 86mm series stepper motor Package list: 1 * Motor driver Note: 1. Do not connect the power supply. The input voltage should not exceed DC80V. When the driver is powered on, the green indicator light PWR will be on. 2. The input control signal voltage is 5V. When the control signal voltage is 24V, it needs...

    • ASIN: B07Z65G51P
    • Brand: Nannday
    • UPC: 739879197251

  • Qunqi L293D Motor Drive Shield for Arduino Duemilanove Mega UNO R3 AVR ATMEL

    Specification: 1.Up to 4 bi-directional DC motors with individual 8-bit speed selection. 2.Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping. 3.4 H-Bridges: per bridge provides 0.6A (1.2A peak current) with thermal protection, can run motors on 4.5V to 12V DC. 4.Pull down resistors keep motors disabled during power-up. 5.2 external terminal power interface, for seperate logic/motor supplies. 6.Tested compatible for Arduino Mega, Diecimila & Duemilanove. Package include: 1x L293D Motor Driv...

    • ASIN: B014KN2898
    • Brand: Qunqi

  • Dual Channel L298N DC Motor Driver Board PWM Speed Dual H Bridge Stepper Module

    Features:1.Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motors2.Built-in TSD, without worrying about motor stall3.Ultra-small size, suitable for assembly and carSpecification:1.Module supply voltage: DC 2V-10V2.Signal input voltage: DC 1.8-7V3.Single

    • UPC: 761738833
    • Model: ELE-1162946

  • Dual Channel L298N DC Motor Driver Board PWM Speed Dual H Bridge Stepper Module Red

    Please note, this item ships from an international seller. Expected delivery is 10-15 days.Dual Channel L298N DC Motor Driver Board PWM Speed Dual H Bridge Stepper ModuleFeatures:1.Dual H-bridge motor driver, can drive two DC motors

    • UPC: 896958731

  • 2Pcs Geekcreit L298N Dual H Bridge Stepper Motor Driver Board For Arduino

    2Pcs L298N Dual H-Bridge Stepper Motor Driver Board For ArduinoDescription:Double H bridge driveChip: L298N (ST NEW)Logical voltage: 5VDrive voltage: 5V-35VLogical current: 0mA-36mADrive current: 2A (MAX single bridge)Storage temperature: -20 to +135Max power: 25WWeight: 30gSize: 43

    • UPC: 460963810
    • Model: ELE-948146

  • L298N DC Stepper Motor Driver Module Dual H Bridge Control Board for Arduino

    SpecificationsDouble H bridge driveChip L298N (ST NEW)Logical Voltage: 5VDriving Voltage: 5V-35VLogic current: 0mA-36mADrive Current: 2A (MAX Single Bridge)Storage temperature: - 20 to ± 135℃Max power: 25WWeight: 30gSize: 43 * 43 * 27mmPackage includes1 * L298N

    • UPC: 721969427

  • L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Electric Project

    Great Sensors for Arduino Project. Having Fun With Electronics and Programming! Description:Widely use in computers, printers, copiers, alarms, electronic toys, automotive electronic equipment, telephones, timers and other electronic products for sound devices.If driving voltage is

    • UPC: 883249546

  • L298N DC Stepper Motor Driver Module Dual H Bridge Control Board for Arduino

    SpecificationsDouble H bridge driveChip L298N (ST NEW)Logical Voltage: 5VDriving Voltage: 5V-35VLogic current: 0mA-36mADrive Current: 2A (MAX Single Bridge)Storage temperature: - 20 to ± 135℃Max power: 25WWeight: 30gSize: 43 * 43 * 27mmPackage includes1 * L298N

    • UPC: 641187840

  • Tebru Stepper Motor Driver, H Bridge Motor Driver,1pc L298N Module H Bridge Driver Board Module for Stepper Motor Smart Car Robot

    Features:This motor driver has strong driving ability, low heat, strong anti-interference ability.H-bridge dual channel type driver, drive voltage is 5V to 35V, drive current is 2A.There is a big heat sink on board for better

    • UPC: 937030294

  • Zaqw Stepper Motor Driver, Motor Driver,1pc L298N Module H Bridge Driver Board Module for Stepper Motor Smart Car Robot

    Features:This motor driver has strong driving ability, low heat, strong anti-interference ability.H-bridge dual channel type driver, drive voltage is 5V to 35V, drive current is 2A.There is a big heat sink on board for better

    • UPC: 759189548

  • FAGINEY Stepper Motor Driving Module,1pc L298N Module H Bridge Driver Board Module for Stepper Motor Smart Car Robot, H Bridge Motor Driver

    Features:This motor driver has strong driving ability, low heat, strong anti-interference ability.H-bridge dual channel type driver, drive voltage is 5V to 35V, drive current is 2A.There is a big heat sink on board for better

    • UPC: 203945926

  • Tebru Motor Driver,1pc L298N Module H Bridge Driver Board Module for Stepper Motor Smart Car Robot, H Bridge Motor Driver

    Features:This motor driver has strong driving ability, low heat, strong anti-interference ability.H-bridge dual channel type driver, drive voltage is 5V to 35V, drive current is 2A.There is a big heat sink on board for better

    • UPC: 887168775

  • Designing a Driver Circuit for a Bipolar Stepper Motor Part 1

    Bipolar Stepper Motor Driver Circuit H Bridge
    stepper motor,bipolar stepper,bipolar,electric motor,H bridge,motor driver circuit,Ardu...

    Drive Circuits in Stepper Motors

    Bipolar Stepper Motor Driver Circuit H Bridge
    Microchip,Technology,motor,control,stepper,Drive,Circuits

    5 Amp Stepper Motor Driver - Part 1 - Building h-bridge circuit board

    Bipolar Stepper Motor Driver Circuit H Bridge
    stepper motor driver,5 amp stepper driver,Arduino stepper driver,Driver module,h-bridge...