Showing 1-24 of 210 results

Dht11 Temperature And Humidity Sensor Raspberry Pi Shopping Deals on 19.09.2019 at TOPPIDUS

  • HiLetgo 5pcs DHT11 Temperature Humidity Sensor Module Digital Temperature Humidity Sensor 3.3V-5V Humidity Measure Range 20%-95% Temperature Measure Range 0-50℃ Celsius with Dupont Wires

    Instruction: This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board. The DHT11 is a pre-calibrated digital output temperature and humidity sensor. The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the programming effort required. Specification: Power supply voltage: 3.3~5.5V DC Output: the single bus digital signal Measuring range: 20-90%RH humidity, temperature 0~50° The measurement accuracy of +...

    • ASIN: B01DKC2GQ0
    • Color: Blue
    • Brand: HiLetgo

  • Organizer 5 Pcs DHT11 Temperature and Humidity Sensor Module for Arduino UNO MEGA 2560 AVR PIC Raspberry Pi 2 3 4B

    Technical parameters: Supply voltage: 3.3 to 5.5VDC Output: single-bus digital signal Measuring range: Humidity 20% to 90% RH, Temperature 0 to 50 celsius degree Accuracy: Humidity +&-5% RH, temperature +&-2 celsius degree Resolution: Humidity 1% RH, temperature 1 celsius degree Long-term stability: less +&-1% RH per Year Notes: 1. To avoid the use of the condensation conditions 2. Long-term storage temperature 10 to 40 celsius degree, humidity below 60% 3. The use of power and ground connection to be correct, so as not to damage the sensor Pac...

    • ASIN: B07TDFPKMW
    • Brand: Organizer
    • UPC: 701715426306

  • FTCBlock 3pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi

    Instruction: This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board. The DHT11 is a pre-calibrated digital output temperature and humidity sensor. The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the programming effort required. Specification: Power supply voltage: 3.3~5.5V DC Output: the single bus digital signal Measuring range: 20-90%RH humidity, temperature 0~50° The measurement accuracy of +...

    • ASIN: B079NJ64RV
    • Color: 3pcs
    • Brand: FTCBlock

  • Gowoops 5 PCS of Temperature Humidity Sensor Module Digital DHT11 for Arduino Raspberry Pi 2 3

    Technical parameters: Supply voltage: 3.3 to 5.5VDC Output: single-bus digital signal Measuring range: Humidity 20% to 90% RH, Temperature 0 to 50 celsius degree Accuracy: Humidity +&-5% RH, temperature +&-2 celsius degree Resolution: Humidity 1% RH, temperature 1 celsius degree Long-term stability: less +&-1% RH per Year Notes: 1. To avoid the use of the condensation conditions 2. Long-term storage temperature 10 to 40 celsius degree, humidity below 60% 3. The use of power and ground connection to be correct, so as not to damage the s...

    • ASIN: B01H3J3H82
    • Color: DHT11*5
    • Brand: Gowoops
    • UPC: 705586404838

  • Gowoops 2 PCS DHT22 Temperature Humidity Sensor Module Digital Measurement for Arduino Raspberry Pi 2 3

    User Manual: http://osoyoo.com/?p=15718http://osoyoo.com/?p=21402Specification:Type: DHT22 temperature and humidity sensorOperate Voltage: DC 3~5.5VSignal Output Type: DigitalTemperature Range: -40 ℃ ~ 80 ℃Temperature Measurement Accuracy: ± 0.5 ℃Humidity Range: 0~100%RHHumidity Measurement Accuracy: ± 2%RH Dimensions:Size: 40 x 15 x 9 mm (L / W / H)Screw hole diameter: 2.6mmWeight: 6gPackage included:2 x DHT22 Sensor Module2 x Cable...

    • ASIN: B073F472JL
    • Color: Dht22*2
    • Brand: Gowoops
    • UPC: 705586405750

  • Comidox 2Sets 3.3V-5V DHT11 Digital Temperature Humidity Sensor Module for Arduino Raspberry Pi(Dupont Line Included)

    Specifications: Working voltage: 3.3V-5V Output form: digital output Small board PCB size: 3.2cm * 1.4cm Power indicator: red Each set weight: about 8g Module interface description (3-wire system): VCC external 3.3V-5V GND external GND DO small board switch digital output interface Note: The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully! Manual measurement, with small error. Please check size in detail before purchase. Re...

    • ASIN: B07KD6VZCM
    • Brand: Comidox
    • UPC: 661083408086

  • Kuman for Arduino Raspberry pi, 5PCS Soil Moisture Sensor Module and 5 PCS Temperature Humidity Sensor with 20PIN Female to Female Dupont Jump Cable 20PIN Male to Female Jump Wires KY71

    The soil moisture module is generally used to detect the moisture content of the soil. The blue potentiometer is used to adjust the threshold of the soil humidity,when clockwise to adjust,the humidity will be higher,the anticlockwise will be lower. The digital output D0 can be connected directly with the microcontroller to detect high level and low level by the microcontroller to detect soil moisture. DHT11 digital temperature and humidity sensor is a calibrated digital signal output temperature and humidity combined sensor,which application-sp...

    • ASIN: B071NX3234
    • Color: Soil Moisture Sensor+Temperature Humidity Sensor
    • Brand: Kuman

  • 5pcs DHT11 Temperature and Humidity Sensor Module for Arduino Raspberry Pi 2 3

    This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board. The DHT11 is a pre-calibrated digital output temperature and humidity sensor. The single-wire wiring scheme makes it easy to be integrated to other applications. The simple communication protocol greatly reduces the programming effort required. Specification: Power supply voltage: 3.3~5.5V DC Output: the single bus digital signal Measuring range: 20-90%RH humidity, temperature 0~50° The measurement accuracy of +-5%RH: humidi...

    • ASIN: B07T7ZR7MS
    • Brand: SongHe

  • KeeYees 5pcs DHT11 Temperature Humidity Sensor Module Digital Single Bus 3.3V-5V with Jumper Wires for Arduino Raspberry Pi

    Specifications: Operating power supply: 3.3-5V Sampling interval: 2 seconds or more Communication distance: up to 20M 2.54mm pitch 3P connection Pin header mounted Weight: 8g Size: 3.2 x 1.4cm Temperature Resolution: 1 °C Accuracy: ± 2 °C Measurement range: 0-50 °C Humidity Resolution: 1% RH Accuracy: ± 5% RH (0-50 °C) Measurement range: 20% RH-90% RH Recommended Storage Environment Temperature: 10-40 °C Humidity: less than 60% RH Package: 5 x DHT11 Temperature and Humidity Sensor Module 15 x Jumper Wire ※ Please note: The color of the...

    • ASIN: B07V5MTQJG
    • Brand: KeeYees
    • UPC: 713871270099

  • Full Stack Web Development with Raspberry Pi 3: Build complex web applications with a portable computer

    Discover how to build full stack web applications with the Raspberry Pi 3About This BookLeverage JavaScript, HTML5, and Cloud APIs to create visual representations and interactive web pages.Learn to install and use a Node.js-based web framework to develop Raspberry Pi 3-powered web applications.A step-by-step guide that will cover from setting up a embedded system to developing embedded, device-powered interactive web applications.Who This Book Is ForThis book is aimed at hobbyist, enthusiasts, and developers eager to develop embedded device-po...

    • ASIN: 1788295897

  • A High Accuracy Temperature and Humidity Sensor Pro(Temp&Hum Sensor),Support Arduino and Raspberry Pi Platforms

    This product is a high accuracy temperature and humidity sensor used in smart home conditions. It consists of a capacitive sensor element used for measuring relative humidity and a negative temperature coefficient (NTC) thermistor used for measuring temperature. Every sensor was calibrated in an accurate humidity room. Small dimension, ultra low power consumption, more than 20m's signal transmission distance make it a good selection for various application environment. The detecting range of this sensor is 5% RH ~ 99% RH, and -40°C ~ 80°C. ...

    • ASIN: B01NAMGNSS
    • Brand: ZIYUN
    • UPC: 736104520167

  • HiLetgo 2pcs DHT22/AM2302 Digital Temperature And Humidity Sensor Module Temperature Humidity Monitor Sensor Replace SHT11 SHT15 for Arduino Electronic Practice DIY

    Feature: DHT11 digital temperature and humidity sensor is a calibrated digital signal output temperature and humidity combined sensor, which application-specific modules capture technology and digital temperature and humidity sensor technology to ensure that products with high reliability and excellent long-term stability. No pullup resistor needed. Just plug right in to Arduino or ESP8266. Description: Main Chip:AM2302 Temperature range: -40 to 80 degree celsius Temperature measurement accuracy: +/- 0.5℃ degree celsius Humidity measuring ran...

    • ASIN: B0795F19W6
    • Color: white
    • Brand: HiLetgo

  • SMAKN® DHT22 / AM2302 Digital Temperature and Humidity measure sensor module for Arduino

    *Dimensions: 28.2mm (length) * 13.1mm (width) * 5.5mm (height). *Weight: 6g. *Operating voltage: 3V - 5.5V. *Sensor Model: AM2302 temperature and humidity sensor. *Signal output format: digital signal. *Temperature measurement range: -40 ℃ --80 ℃. *Measurement accuracy: 0.5 ℃. *Humidity measuring range: 0--100% RH. *Accuracy: 2% RH. *Resolution: 16 bit. *With fixing screw holes for easy installation and fixation. Aperture 2.6mm. Wiring instructions: *"+": connected power supply positive. *"-": connected power supply negative. *"out": conn...

    • ASIN: B018JO5BRK
    • Brand: SMAKN
    • UPC: 710185280813

  • DHT22 Digital Temperature and Humidity Sensor, Aideepen AM2302 Temp Humidity Monitor Sensor Replace SHT15 SHT11 for Arduino

    Specification:1.Type:AM2302 2.Humidity range:0-100%RH 3.Temperature range:-40~80℃ 4. 4-pin package 5.Ultra-low power 6.No additional components 7.Excellent long-term stability 8.All calibration, digital output 9.Completely interchangeable 10.Long distance signal transmission 11.Relative humidity and temperature measurement Package Included: 1 x AM2302 Temp Humidity Sensor...

    • ASIN: B01IBBFOF0
    • Brand: Aideepen
    • UPC: 611029132926

  • NOYITO DHT11 Digital Temperature Humidity Sensor Module 20-90% RH 0-50°C Single Bus Digital Temperature and Humidity Sensor Module for Arduino (Pack of 2)

    Parameter: Product Name: DHT11 Digital Temperature Humidity Sensor Module, single bus digital temperature and humidity module. Humidity measurement range: 20-90% RH ± 5%. Temperature measurement range: 0-50 ° C ± 2 ° C. Working voltage: DC 3.3V-5V. Output form: digital output. It can detect the humidity and temperature of the surrounding environment. PCB size: 3.2cm * 1.4cm. Module interface description (3-wire) 1, + : VCC, connect 3.3V-5V 2, - : GND 3, S: digital output interface Package Included: 2pcs NOYITO DHT11 Digital Temperature Hu...

    • ASIN: B07HX14M4K
    • Brand: NOYITO
    • UPC: 680613661449

  • DHT11 Temperature and Humidity Sensor Module DHT11 Module with Cable for Arduino DIY Kit

    Features:To detect the humidity and temperature of the surrounding.DHT11 sensor, high reliability and excellent long-term stability.Full scale calibration, digital output.With fixed bolt hole for easy installation.Dupont line included.Specifications:Material: PCBTemperature Resolution: 1℃Temperature Accuracy: ±2℃Temperature Detect Range:

    • UPC: 878558730

  • DFR0067 DHT11 Temperature and Humidity Sensor, By DFROBOT From USA

    Here comes new generation of digital temperature and humidity sensor. As powerful as it used to be, and easier to use. The capital D besides the socket indicates it's a digital sensor. Also on both

    • UPC: 337997061

  • DHT11 Temperature and Humidity Sensor Module DHT11 Module with Cable for Arduino DIY Kit

    Features:To detect the humidity and temperature of the surrounding.DHT11 sensor, high reliability and excellent long-term stability.Full scale calibration, digital output.With fixed bolt hole for easy installation.Dupont line included.Specifications:Material: PCBTemperature Resolution: 1℃Temperature Accuracy: ±2℃Temperature Detect Range:

    • UPC: 114000645

  • DHT11 Temperature and Humidity Sensor Module DHT11 Module with Cable for Arduino DIY Kit

    Features:To detect the humidity and temperature of the surrounding.DHT11 sensor, high reliability and excellent long-term stability.Full scale calibration, digital output.With fixed bolt hole for easy installation.Dupont line included.Specifications:Material: PCBTemperature Resolution: 1℃Temperature Accuracy: ±2℃Temperature Detect Range:

    • UPC: 201338145

  • KY-015 DHT11 Temperature Humidity Sensor Module For Arduino

    Description:The sensor module is including resistive humidity sensing component and NTC temperature testingThe compatible digital temperature humidity sensor module is component and connected with 8-byte MCUFast response, great anti-interference ability and durableWith fixed bolt hole

    • UPC: 783140572

  • KY-015 DHT11 Temperature Humidity Sensor Module For Arduino

    Description:The sensor module is including resistive humidity sensing component and NTC temperature testingThe compatible digital temperature humidity sensor module is component and connected with 8-byte MCUFast response, great anti-interference ability and durableWith fixed bolt hole

    • UPC: 247713831

  • DHT11 Temperature and Humidity Sensor Module for Arduino

    Great Sensors for Arduino Project. Having Fun With Electronics and Programming! Description:This sensor module utilizes DHT11 as the sensitive component and has a bypass capacitor and a pull-up resistor on-board.DHT11 is a pre-calibrated digital output temperature

    • UPC: 384747937

  • ESP8266 DHT11 Temperature Humidity Sensor Module ESP-01S Serial Wireless Transceiver Adapter Board for Arduino

    Features:Working Voltage: 3.7V~12V; Detection Range: 20~90%RH, 0~50°C.Temperature and Humidity Sensor: DHT11.: ESP-01 / ESP-01S (NOT included).Measuring Accuracy: Temperature: ±2°C; Humidity: ±5%RH.Can used for smart home or IOT projects.Specifications:Material: FR4Temperature and Humidity Sensor: DHT11: ESP-01 /

    • UPC: 782429394

  • 10PCS DHT11 Digital Temperature and Humidity Sensor for Arduino

    Please note, this item ships from an international seller. Expected delivery is 10-15 days. International ShippingFeatures:Reliable and stable.Low power consumption.Quick response time(All calibration, completely interchangeable.Professional for measuring temperature and humidity.Mini size: 15.5*12*5.5mmSpecifications:Material: PCBTemperature Measurement Range:

    • UPC: 503036849

  • KY-015 DHT11 Temperature Humidity Sensor Module For Arduino

    Description:The sensor module is including resistive humidity sensing component and NTC temperature testingThe compatible digital temperature humidity sensor module is component and connected with 8-byte MCUFast response, great anti-interference ability and durableWith fixed bolt hole

    • UPC: 971776405

  • How to Set Up the DHT11 Humidity Sensor on the Raspberry Pi

    Dht11 Temperature And Humidity Sensor Raspberry Pi
    raspberry pi,circuit projects,electronics projects,circuits,circuit basics,How to Set U...

    Raspberry Pi DHT11 DHT22 Temperature and Humidity Sensor

    Dht11 Temperature And Humidity Sensor Raspberry Pi
    Rapberry Pi DHT11 DHT22 Temper,raspberry pi,dht11,dht22,sensor,temperature,humidity,python

    DHT11 (Raspberry Pi)

    Dht11 Temperature And Humidity Sensor Raspberry Pi
    DHT11,Raspberry Pi,Temperature,Humidity